Designed locally by Dash-Board
Rigorously tested and inspected.
Make every crosscut square
The Guide Rail Bracket Set is the precision crosscut engine of the Dash-Board system. It hinges your guide rail to a fixed, repeatable 90° position so every crosscut lands in exactly the same place. For the complete precision crosscut setup — where you register your fence, set a stop, and cut repeat parts without re-measuring — pair it with the F2 Surface Mount Fence and the Reversible Flip Stop.
Complete the system
- Required for precision crosscuts: F2 Fence (sets your reference edge) + Flip Stop (sets repeat length)
- Optional but highly recommended: F1 Fence lengthens your reference edge, supports longer pieces, and allows dimensioned cuts on the right of the blade. Pairs perfectly with The Rip Gauge.
Universal Compatibility with Major Guide Rail Systems
Works with these track saws/guide rails: Festool/Makita-style rails · Bosch/Mafell rails · DeWalt/Metabo rails · Powertec · Milwaukee · WEN · Grizzly
Recommended rail length: Width of table + 13” (330mm) minimum
Works with these workbenches: Dash-Board bench · ShortCut bench · Festool MFT3 & 1080 · Benchdogs Ultra MFT · Kreg ACS · TrackTubes · T-slot extrusion tables (8mm slot) · Wood-frame tables with standard T-track
High-Performance Features for Enhanced Workshop Efficiency
Key Features
- Optimized for strength, minimized weight, and maximized cut capacity
- Smooth pivot mechanism
- Comfortable all-metal knobs
- Integrated SpiRail Dogs simplify rail alignment
- T-bar mounting ensures quicker, easier, more solid attachment
Expand Your Cutting Capacity with Reliable Precision
Maximum cutting height of 2.9” (74mm).
Tool-Free Installation for Effortless Setup
Our Guide Rail Brackets embody Dash-Board’s commitment to tool-less installation and adjustment.
Space-Saving Design for an Organized Workbench
Brackets drop conveniently below table height when not in use and don’t take up space on your bench top.
Product Details
What’s in the box:
- Front and Rear Brackets
- 1 SpiRail Dog that attaches to any guide rail’s bottom slot
- 2 Universal Setup Blocks to position the rail so your saw kerf will not cross a line of dog holes
- 4 Bench Dogs - Medium (1/2")for 20mm holes, which integrate with the USBs for a simple and effective setup process on your workbench top
The Guide Rail Brackets can be used with all major guide rail brands
Product Safety:
- Beware sharp corners
- Be mindful of pinch points
- Secure all hardware before use to avoid accidents or injury.
- Use appropriate lifting form to avoid injury
- Keep out of reach of children
- Workbenches and Outriggers not intended as standing platforms
- For safest operation please keep static loads below 300 lbs or 136 kg
- Disassembly or product alterations are not recommended
- Do not use products for uses other than intended
Returns and Refunds
Your satisfaction is guaranteed.
To begin the return process, please contact us. Return shipping instructions will be provided.
If your product is eligible for a return, it must be packaged according to our specifications and arrive at our shop in immaculate condition, able to be sold again as new (including all accessories and components provided) within 30 days of receipt of products.
- The Dash-Board and ShortCut are not eligible for return.
- If we send you a defective or incorrect item you may return the item in unused condition, in exchange for a refund. We will be responsible for covering the return shipping cost.
- The buyer is responsible for the cost of the return for any other reason.
You may cancel your order anytime before it ships for a full refund.
Shipping & International Orders
FREE shipping on orders over $100!
*Only available in the contiguous U.S. Please contact us if a specific carrier cannot deliver to your address.
We ship with USPS/UPS/FEDEX. We are not liable for any delays caused by the USPS/UPS/FEDEX for any reasons.
If you are experiencing complications for your delivery, please contact the shipping carrier. For most cases, Dash-Board is unable to provide any additional information or changes to your shipment once it has left our facilities.
Dash-Board is not liable for any lost packages due to address errors.
Due to strong growth, we are no longer able to customize our products.
Due to the popularity of our products, we continually sell out which results in backorders. We do not have the ability to delay charges to your credit card and your purchase ensures your place in line in the next production.
International Orders
Due to International customs fees, import taxes and shipping costs - we are not able to offer a “Free Shipping” option for our international customers.
Most countries impose a customs duty and import tax on goods from abroad. These customs duties and import taxes are beyond our control and could delay your package from arriving on time (this is rare). VAT, customs fees, and any other import costs are the customer's responsibility and are not included in this price. Unfortunately, we cannot offer refunds or future accommodations for customers receiving customs duties or import taxes.
If you are unable or simply do not wish to pay the customs fee, your package will be returned to us and you will only be penalized for the cost of shipping your package. You will be refunded upon receiving your order back at our facility.
If you don’t see your country listed in the dropdown menu at checkout, please contact us and we will send you an invoice.
Guide Rail Bracket Set
Videos
Recommended for you
Reviews