Your Cart
Product Title
$0
$0
-
+
Your cart is empty.
Add Discount Code?
Add Cart Note?
No items found.
No items found.
Workbench Accessories
F2 Surface Mount Fence
$229.00
Dash-Board’s main surface-mount fence for crosscuts, rips, miters, and repeatable setups. Mounts securely to 20mm holes (incl. Track Stars) without tools.
Quantity
-
+
Add to Cart
Buy Now
Free shipping on orders over $100
Designed in Boulder, CO
Precision. Accuracy. Confidence.
Quality Guaranteed
Rigorously tested and inspected.
30-Day Returns
Satisfaction guaranteed
Direct Support
Talk to Rob, the inventor
53 3/4"
Total Fence Length (1390mm)
3
Sliding Fence Blocks Included
0
Tools Required
0-90°
Adjustable Through Any Angle
01 / REFERENCE
Your crosscut reference edge.
The F2 is solid, sleek, and versatile, the main fence in the Dash-Board system. It gives you a long, dead-true reference edge on top of your bench so every workpiece registers in the same place, cut after cut. Set the F2 once against your guide rail and the rail brackets, lock it down, and run repeat parts all day without re-measuring. A tongue section slips under the guide rail to support material right near the cut line for cleaner, splinter-free crosscuts.
- 54¾" (1390mm) long anodized aluminum extrusion
- Solid, rigid reference edge for repeat work
- Tongue section supports material near the cut line
- Designed to work with the Guide Rail Brackets and Track Stars
02 / MOUNTING
Mount it on any bench with 20mm holes.
The F2 mounts to any 20mm hole grid using our unique sliding Fence Blocks. Three blocks come with each fence, and they slide along the fence extrusion to match whatever hole pattern your bench has. Drop them into the holes, lock them down with all-metal knobs, and the fence is set. No tools. No fasteners. No fiddling with hardware you'll lose.
- 3 sliding Fence Blocks included
- Mounts to any grid of 20mm holes
- All-metal knobs, tool-free installation
- Adjustable along the fence extrusion
03 / MITER
Add Track Stars and swing through any angle.
The F2 isn't just for 90-degree cuts. Mount one end to your bench and the other end to a Track Star and you can swing the fence through a wide range of angles, then secure it for miter cuts that set up as easily as a crosscut. The F2 is also compatible with our Reversible Flip Stop for repeat-length miters or angled batch work.
- Swings through wide angle range for miters
- Mounts on Track Stars for added crosscut capacity
- Compatible with Reversible Flip Stop for repeat cuts
- Same workflow whether square or angled
04 / BUILT TO LAST
Anodized aluminum. Built to live in your shop.
The F2 is built from a single proprietary anodized aluminum extrusion that resists wear, marking, and corrosion in shop and job-site conditions. A rubber bumper on the end protects the fence and your floor when you stand it up between uses. Like every Dash-Board accessory, the F2 is designed to be the last fence you'll buy.
- Proprietary anodized aluminum extrusion
- Rubber bumper for vertical storage
- Resistant to wear, corrosion, and shop conditions
- Designed for long-term professional use
Product Specs
What’s in the box:
- 1 F2 Fence Extrusion
- 3 Fence Blocks
- 1 Rubber Bumper
Materials:
- Anodized aluminum
- Rubber bumper
Specifications:
- Length: 54.75” (1390mm)
- Width: 1.1” (28mm)
- Height: 1.5” (38mm)
Key Features:
- Adjustable to any angle
- Compatible with any grid of 20mm holes
- Easily and securely mounts with our unique Fence Blocks
- Tongue section slips under the guide rail for support near the cut line
- Compatible with our Reversible Flip Stops for repeat cuts
- Also mounts on Track Stars for added crosscut capacity
- Rubber bumper to protect fence and floor when stored standing up
Works only with track saws/guide rails that cut on the right side of the blade: Festool/Makita-style rails · Bosch/Mafell rails · DeWalt/Metabo rails · Powertec · Milwaukee · WEN · Grizzly
Works with these workbenches: Any workbench with 20mm holes
Product Safety:
- Be mindful of pinch points
- Secure all hardware before use to avoid accidents or injury.
- Use appropriate lifting form to avoid injury
- Keep out of reach of children
- Workbenches and Outriggers not intended as standing platforms
- For safest operation please keep static loads below 300 lbs or 136 kg
- Disassembly or product alterations are not recommended
- Do not use products for uses other than intended
Shipping & International Orders
Returns & Refunds
What our customers say
Complete the system
Products that pair with
F2 Surface Mount Fence
Product Title
$0.00
$0.00
+
Product Title
$0,00
$0,00
+
FAQs
Know Before You Buy
Everything you need to know about the Dash-Board system, from compatibility to setup.
Contact Support
What is the F2 Surface Mount Fence and what does it do?
What workbenches is the F2 Fence compatible with?
Does the F2 Fence work with my track saw?
Can the F2 Fence be used for miter cuts?
What is included with the F2 Surface Mount Fence?
F2 Surface Mount Fence
$229.00
Add to Cart
Buy Now
