Your Cart
Product Title
$0
$0
-
+
Your cart is empty.
Add Discount Code?
Add Cart Note?
No items found.
No items found.
Workbench Accessories
The Wingman
$65.00
Extends the reach of Gen 2 Track Stars and Guide Rail Brackets. Adds capacity for longer rips, wider crosscuts, routing, and full-sheet workflows.
Quantity
-
+
Add to Cart
Buy Now
Free shipping on orders over $100
Designed in Boulder, CO
Precision. Accuracy. Confidence.
Quality Guaranteed
Rigorously tested and inspected.
30-Day Returns
Satisfaction guaranteed
Direct Support
Talk to Rob, the inventor
10'+
Long Rip Capacity
8.125"
Wingman Length (206mm)
3"
Wingman Width (75mm)
0
Tools Required
01 / EXTENSION
Push your guide rail past the bench edge.
The Wingman is a precision-milled aluminum plate that attaches to a Track Star or the front Guide Rail Bracket and extends your guide rail's reach. The plate features a slot that accepts the SpiRail Dogs you've installed in your guide rail, so the rail registers in the Wingman. The result is the ability to make crosscuts wider than our standard configuration, including full sheets and rips longer than you could stage on the bench alone.
- Precision-milled SpiRail Dog slot
- Registers your rail beyond our Brackets and Track Stars
- Adds 5.25"/133mm more crosscut and rip capacity per wingman
02 / 49" CROSSCUT CAPACITY
Full-sheet crosscuts.
With the right combination of other accessories, the Wingman enables full-sheet crosscuts by simply adding it to your front Guide Rail Bracket or a Track Star on a Dash-Board or ShortCut workbench. A pair of Wingman will add 10.5"/266mm to our long rip setup. This is the kind of capacity that turns a portable workbench into a full sheet goods cutting platform without the floor space of a table saw or panel saw.
- Full-sheet crosscut capacity
- Longer long rips
- Replaces table saw and panel saw functionality for sheet work
- Built around the standard Dash-Board workbench footprint
03 / SIMPLICITY
One plate. Two knobs. Done.
The Wingman is one of the smallest, simplest accessories in the Dash-Board lineup, and that's the point. One precision-milled anodized aluminum plate, two comfortable knobs, two washers. The whole kit installs in seconds with no tools and locks down rigid enough to register a guide rail without flex. At $65, it's the cheapest path to increase rip and crosscut capacity in the Dash-Board system.
- 1 Wingman Plate, 2 Knobs, 2 Washers
- Solid anodized aluminum construction
- Installs in seconds with no tools
- Lowest-cost path to extended rail reach
Product Specs
What’s in the box:
- 1 Wingman Plate
- 2 Knobs
- 2 Washers
Materials
- Anodized aluminum
Specifications
- Length: 8.125” (206mm)
- Width: 3” (75mm)
Compatibility:
- Only with GEN 2 Track Stars and Guide Rail Brackets.
Works with these workbenches when paired with our Guide Rail Brackets or Track Stars: Dash-Board bench · ShortCut bench · Festool MFT3 & 1080 · Benchdogs Ultra MFT · Kreg ACS · TrackTubes · T-slot extrusion tables (8mm slot) · Wood-frame tables with standard T-track
Product Safety:
- Be mindful of pinch points
- Secure all hardware before use to avoid accidents or injury.
- Use appropriate lifting form to avoid injury
- Keep out of reach of children
- Workbenches and Outriggers not intended as standing platforms
- For safest operation please keep static loads below 300 lbs or 136 kg
- Disassembly or product alterations are not recommended
- Do not use products for uses other than intended
Shipping & International Orders
Returns & Refunds
What our customers say
Complete the system
Products that pair with
The Wingman
Product Title
$0.00
$0.00
+
Product Title
$0,00
$0,00
+
FAQs
Know Before You Buy
Everything you need to know about the Dash-Board system, from compatibility to setup.
Contact Support
What is the Wingman and what does it do?
Is the Wingman compatible with my Track Stars and Guide Rail Brackets?
Do I need the Wingman to make full-sheet rips?
How does the Wingman work with Parallel Guides?
What is included with the Wingman?
The Wingman
$65.00
Add to Cart
Buy Now
